> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.indusuite.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# How to change wifi network configuration using WeldCloud Link

# How to change WiFi network configuration for your WeldCloud enabled equipment

At times, you may need to connect your WeldCloud-enabled equipment to a different network than the one it was originally configured with. This could be due to various reasons, such as the creation of a dedicated SSID specifically for your WeldCloud devices or an ongoing Wi-Fi deployment initiative by your IT department within the production facility.

To facilitate this transition seamlessly, the WeldCloud Link application for Android devices offers a dedicated function that allows users to reconfigure the network settings of any WeldCloud-enabled device efficiently.

Please follow the detailed step-by-step instructions below to complete the process successfully.

**1.** Open **WeldCloud Link** on your Android device

**2.** Tap **LOG IN** and use your WeldCloud apps credentials

**3.** Tap on the hamburger menu in the top left corner

**4.** Tap **Welding Unit Setup**

**5.** Tap **CONNECT**

**6.** Available WeldCloud devices will be displayed. Tap on the one you want to connect to

![Available WeldCloud devices will be displayed. Tap on the one you want to connec](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step06_1drzzed.jpg)

**7.** Wait for Bluetooth connection to be ready

![Wait for Bluetooth connection to be ready](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step07_r7o5db.jpg)

**8.** Tap **NETWORK SETTINGS**

![Tap NETWORK SETTINGS](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step08_ob6zxu.jpg)

**9.** Enter gateway password you set during first configuration and tap **LOGIN**

![Enter gateway password you set during first configuration and tap LOGIN](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step09_ybbskd.jpg)

**10.** Select **Wifi**

![Select Wifi](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step10_14kctju.jpg)

**11.** Tap on Wifi icon to scan for available wifi networks

**12.** WeldCloud Link will scan for available Wi-Fi networks

![WeldCloud Link will scan for available Wi-Fi networks](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step12_th1mic.jpg)

**13.** Tap on the new Wifi network you want to connect to

![Tap on the new Wifi network you want to connect to](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step13_u9ingc.jpg)

**14.** StepFill-in Wifi password and tap on **SAVE CHANGES**

![StepFill-in Wifi password and tap on SAVE CHANGES](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step14_9lb351.jpg)

**15.** A message shows new network settings applied

![A message shows new network settings applied](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step15_1tnnlml.jpg)