> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.indusuite.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# How to Create Weld Instructions

Add Groove Designs and Weld Layer Configuration drawings to your Welds in WeldCloud Assembly. You can select from existing sketches, copy from WPS, customize designs, or create new sketches (which redirects to WeldCloud Notes).

## Procedure

1. Once inside the desired Assembly, click **"Welds"**

   ![Click Welds](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step01-click-welds_ot8ihg.jpeg)

2. Click on the weld you want to add instructions to

   ![Click weld](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step02-click-here-to-open-weld_14q9a0o.jpeg)

3. Scroll down and you'll find the **"Groove Design"** and **"Weld Layer Configuration"** sections

   ![Groove Design and Weld Layer](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step03-groove-design-and-weld-_rp0xs6.jpeg)

4. Clicking on **"Actions"**, you'll find options to Select, Copy from WPS, or Create a New Sketch. You can even Customize your designs if needed

   ![Actions options overview](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step04-actions-options-overvie_zfcwt7.jpeg)

5. Click **"Actions"** under Groove Design

   ![Click Actions](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step05-click-actions_sweq8t.jpeg)

6. Click **"Customize"** to modify an existing design

   ![Click Customize](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step06-click-customize_1b09m2u.jpeg)

7. Click the save button after customizing

   ![Click save](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step07-click-here-to-save_1t1ess5.jpeg)

8. You can also create a new sketch by clicking **"Actions"** and then **"Create New Sketch"** — this will take you to WeldCloud Notes to continue

   ![Create New Sketch option](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step08-create-new-sketch-optio_yt4ksp.jpeg)

9. Click to confirm and go to WeldCloud Notes

   ![Click to create sketch](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step09-click-here-to-create-sk_1b54w3x.jpeg)

10. You can do the same for the **"Weld Layer Configuration"** as you did for the "Groove Design"

    ![Same for Weld Layer Config](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step10-same-for-weld-layer-con_m2ptfu.jpeg)