> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.indusuite.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# How to enable ESAB Warrior EDGE NFC cards for operators

Set up operator traceability with NFC cards on ESAB Warrior EDGE welding systems.

## Prerequisites

- ESAB Warrior EDGE welding system
- ROBUSTFEED EDGE with built-in RFID capabilities
- NFC cards (2 admin cards + 3 user cards)
- Access to [apps.indusuite.com](https://apps.indusuite.com)
- WeldCloud Fleet subscription

## Equipment Overview

### NFC Card Sets

| Type | Quantity | Purpose |
|------|----------|---------|
| **Admin cards** | 2 | System configuration |
| **User cards** | 3 | Operator identification |

### Card Versions

| Version | Features |
|---------|----------|
| **New version** | NFC ID printed on card |
| **Older version** | NFC ID not printed (requires lookup) |

### Hardware

- **ROBUSTFEED EDGE** with built-in RFID capabilities
- Wire feeder with NFC reader

## Procedure

### Step 1: Enable Personal Login in Warrior EDGE

1. Tap an **admin card** on the Warrior EDGE feeder
2. Navigate to system settings
3. Enable **Personal Login** feature
4. Confirm activation

### Step 2: Create Welder in Personnel Management

1. Access **WeldCloud Settings** app
2. Navigate to **Personnel Management**
3. Create new welder profile:
   - Enter welder name
   - Set permissions
4. Associate with user NFC card:
   - For **new cards:** NFC ID is printed on card
   - For **older cards:** Use [how to get NFC ID](https://support.indusuite.com/en/article/) article

### Step 3: Create Machine Permission Group

1. Access **WeldCloud Fleet**
2. Create permission group:
   - Select group type (All machines or Custom)
   - Name the group
3. Assign welder to group
4. Set permission levels for machines:
   - Admin
   - Full Access
   - Limited
   - No Access

![Warrior EDGE NFC](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/warrior-edge-nfc_4fjzle.png)

## Quick Reference

### Setup Summary

```
Enable Personal Login → Create welder profile → Associate NFC card → Create permission group
```

### NFC Card Types

- **Admin (2 cards):** For system configuration and setup
- **User (3 cards):** For operator identification during welding

### Permission Levels

- **Admin** - Full system access
- **Full Access** - Complete machine control
- **Limited** - Basic operations
- **No Access** - Blocked

### NFC ID Location

- **New cards:** Printed directly on card
- **Older cards:** Requires lookup via article or support