> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.indusuite.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Update Preweld Temperature

Record preweld temperature readings for quality documentation in WeldCloud Fleet.

## Prerequisites

* Access to [apps.indusuite.com](https://apps.indusuite.com)
* WeldCloud Fleet subscription
* Equipment connected to WeldCloud

## Procedure

### Step 1: Navigate to Machine

Inside WeldCloud Fleet, navigate to **Machines & Stations**, and then select the desired machine.

![Navigate to Machine](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step01-navigate-to-machine_171vw61.jpeg)

### Step 2: Select Machine

Click on the machine you want to update (e.g., "Machine 3").

![Select Machine](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step02-select-machine_19f1ff0.jpeg)

### Step 3: Click Edit

Click **"Edit"**, and then enter the temperature in the **"Preweld temperature (°C)"** field.
![](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/image_8a9iqo.png)



### Step 4: Enter Temperature

Click the **"Preweld temperature (°C)"** field and enter the temperature value.

![Enter Temperature](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step04-enter-temperature_1vk37q9.jpeg)

### Step 5: Click Save

Click **"Save"** and the temperature will be recorded.

![Click Save](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step05-click-save_q3f2f6.jpeg)

### Step 6: Temperature Recorded

The temperature is now recorded in the system.

![Temperature Recorded](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/step06-temperature-recorded_15jvhw4.jpeg)

## Quick Reference

### Temperature Field

* **Field name:** Preweld temperature (°C)
* **Unit:** Celsius (°C)
* **Location:** Machine settings → Edit mode
* **Format:** Decimal number (e.g., 100.0)

### Alternative Method

You can also update or register a temperature using **WeldCloud Assembly** application.

### Typical Temperature Ranges

* **Preheat:** 50-250°C (depending on material/thickness)
* **Interpass:** Usually same as preheat
* **Ambient:** 10-40°C