> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.indusuite.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Weld data Analytics feature

Advanced analytics for welding data insights. Use scatter charts to identify weld sessions outside WPS limits, understand parameter distribution across your fleet, and drill into specific sessions.

## Prerequisites

- Access to [apps.indusuite.com](https://apps.indusuite.com)
- WeldCloud Productivity subscription
- Recorded weld sessions in the system

## Procedure

### Step 1: Open WeldCloud Productivity

Click on the **WeldCloud Productivity** app.

![Open WeldCloud Productivity](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step01-click-on-weld_d3f4zp.jpeg)

### Step 2: Navigate to Analytics

Click **"Analytics"** in the left menu under the Weld Data section.

![Click Analytics](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step02-click-analyti_pwkkpx.jpeg)

### Step 3: Select Time Span

Select the desired time span from the filter options. In this example, select **"Last week"**.

![Select time span](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step03-select-desire_1yx6kji.jpeg)

### Step 4: Select Machines

Select the welding machines you want to analyze from the machine filter.

![Select machines](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step04-select-weldin_hxkrxy.jpeg)

### Step 5: Configure Tack Weld Exclusion

Click the **"Exclude tack welds"** field to enable tack weld filtering.

![Exclude tack welds field](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step05-click-the-exc_j4jxyo.jpeg)

### Step 6: Set Tack Weld Duration

Exclude **Tack Welds** by defining the duration threshold using the slider. Default value: **arc time below or equal 3 seconds**.

![Set tack weld duration](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step06-exclude-tack-_1w6spva.jpeg)

### Step 7: Apply Filters

Click **"Apply"** to load the analytics with your selected filters.

![Click Apply](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step07-click-apply_nr777e.jpeg)

### Step 8: Check Request Limit

If not all welding sessions are included, a notification appears indicating the data is incomplete.

![Request limit notification](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step08-notification-_ae2ign.jpeg)

### Step 9: Adjust Request Limit

Adjust the **"Request limit"** setting to include all missing welding sessions.

![Adjust request limit](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step09-adjust-reques_1n8wcnm.jpeg)

### Step 10: Apply Updated Limit

Click **"Apply"** after adjusting the request limit to reload with complete data.

![Apply updated limit](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step10-click-apply-a_x5sgjq.jpeg)

### Step 11: View All Sessions

All sessions matching the applied filters are now visualized in the scatter chart.

![All sessions in chart](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step11-all-sessions-_h0wgc5.jpeg)

### Step 12: Filter by Parameter Ranges

Refine your data by setting **specific ranges** for parameters like Average Amperage and Average Voltage. Click **"Apply"** when done.

![Filter by ranges](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step12-refine-data-f_ujq6bv.jpeg)

### Step 13: View Filtered Results

The number of welding sessions falling in specified ranges appears under **"Sessions"**. Matching data points are highlighted in the chart and statistics adjust accordingly.

![Filtered results](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step13-sessions-and-_4f0qhx.jpeg)

### Step 14: Start Graph from Origin

Optionally, select the **"Clicking the Graph always starts from 0 (X/Y)"** checkbox to include the origin in the chart.

![Start from origin checkbox](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step14-optional-chec_esv7ro.jpeg)

### Step 15: View Chart with Origin

The chart rearranges to include the origin (0,0).

![Chart with origin](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step15-chart-rearran_14fpj4v.jpeg)

### Step 16: Drill into Sessions

Hover over a data point for extra information. Click on a data point to open that welding session's details page.

![Drill into session](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step16-hovering-on-d_18j76lr.jpeg)

### Step 17: Switch to Limits Mode

Change the **"Range mode"** option from "Filter data" to **"Limits"**.

![Switch to Limits mode](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step17-change-range-_1lxdky9.jpeg)

### Step 18: Apply Limits

Click **"Apply"** to apply the Limits range mode.

![Apply limits](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step18-click-apply-a_1ouhoie.jpeg)

### Step 19: View Limits Visualization

The limits area is highlighted on the chart, clearly showing welding sessions outside the defined ranges.

![Limits visualization](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step19-limits-area-h_9c38bn.jpeg)

### Step 20: Start from Origin in Limits Mode

Optionally, select the **"Clicking the Graph always starts from 0 (X/Y)"** checkbox for the limits view.

![Origin in limits mode](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step20-optional-chec_1fxa683.jpeg)

### Step 21: Final View with Origin

Chart rearranged to include origin (0,0) in limits mode, showing all sessions with limit boundaries highlighted.

![Final view](https://storage.crisp.chat/users/helpdesk/website/-/1/c/b/d/1cbda94eeb4b4100/analytics-step21-chart-rearran_1mno19t.jpeg)

## Quick Reference

| Feature | Description |
|---------|-------------|
| X/Y axis | Configurable parameters (amperage, voltage, arc time, WFS, heat input, travel speed) |
| Filter data mode | Only shows sessions within specified ranges |
| Limits mode | Highlights limit boundaries, shows all sessions |
| Tack weld exclusion | Filter by arc time threshold (default: 3s) |
| Request limit | Adjust to include all sessions |
| Data point click | Opens session details |
