How to connect ESAB Aristo system to WeldCloud using gateway web interface

Connect via Wi-Fi

Step-by-step walkthrough for connecting an ESAB Aristo system with Quark gateway to WeldCloud by accessing the gateway's web configuration page over Ethernet and configuring WiFi. 17 steps, ~5 minutes.

Prerequisites

• ESAB Aristo system with Quark gateway (compatible systems)
• PC with Ethernet port and Ethernet cable
• Static IP 192.168.254.10/24 configured on PC (see How to set a Static IP Address in Windows)
• Asset pre-created in WeldCloud with configuration file downloaded
• Active InduSuite account with WeldCloud license
• At least one Site created in WeldCloud

Procedure

1. Turn on welding equipment and wait 2 minutes for gateway to boot
2. Connect your PC and welding equipment through Ethernet cable

   
   

   
   
3. Open browser and navigate to 192.168.254.1 (open with https://)
4. Enter credentials and click "Login" — default username: admin, password: gateway

   
   

   
   
5. You will be forced to change the default gateway password — choose your password and fill in twice

   
   

   
   
6. Click "Save new password"

   
   

   
   
7. Click "Configuration"

   
   

   
   
8. Click on "Wifi"

   
   

   
   
9. Click on dropdown menu and select your WiFi network name

   
   

   
   
10. Enter your WiFi network password

11. Click "Save changes"

12. On the top right side of the screen you will be notified that gateway is connected to your WiFi network

13. Click "Cloud configuration"

14. Click on "Browse" button and load the configuration file downloaded previously

15. Click "Save changes"

16. Check the Cloud icon on the top right side of the screen to verify WeldCloud connectivity

17. Click "Home" for further system status information

Connect via wired connection

Step-by-step walkthrough for connecting an ESAB Aristo system with Quark gateway to WeldCloud by accessing the gateway's web configuration page over Ethernet and configuring wired network connectivity. 14 steps, ~1 minute.

Prerequisites

• ESAB Aristo system with Quark gateway (compatible systems)
• PC with Ethernet port and Ethernet cable
• Static IP 192.168.254.10/24 configured on PC (see How to set a Static IP Address in Windows)
• Asset pre-created in WeldCloud with configuration file downloaded
• Active InduSuite account with WeldCloud license
• At least one Site created in WeldCloud

Procedure

1. Turn on welding equipment and wait 2 minutes for gateway to boot
2. Connect your PC and welding equipment through Ethernet cable

   
   

   
   
3. Open browser and navigate to 192.168.254.1 (open with https://)
4. Enter credentials and click "Login" — default username: admin, password: gateway

   
   

   
   
5. You will be forced to change the default gateway password — choose your password and fill in twice

   
   

   
   
6. Click "Save new password"

   
   

   
   
7. Click "Configuration"

   
   

   
   
8. Click "Cloud configuration"

   
   

   
   
9. Click on "Browse" button and load the configuration file downloaded previously

   
   

   
   
10. Click "Save changes"

11. Click "Network configuration"

12. Click "Wired"

13. Select IP assignment — use Dynamic (DHCP) for most network environments

14. Click "Save changes"

15. Disconnect your laptop from the Aristo and connect the Aristo to your wired network

Updated on: 17/07/2026