How to connect ESAB EDGE system to WeldCloud using gateway web interface

Prerequirements

Before starting, please ensure following prerequisites are met

Active InduSuite account with WeldCloud Productivity and/or Fleet license
PC with Ethernet port and Ethernet cable
At least one Site created in your organizational structure in WeldCloud (details can be found here)
Asset created in WeldCloud and its configuration file is available (instructions in this guide)
Wi-Fi dongle, in case you want to connect ESAB Warrior EDGE through Wi-Fi network (Please look at supported USB to W-Fi dongles here)

WeldCloud connection steps - Connection method : WiFi network

Install WiFi and Bluetooth dongles to add wireless and Bluetooth capabilites to Warrior EDGE welding system as explained here
Turn on welding equipment and wait 2 minutes
Follow instructions below

WeldCloud connection steps - Connection method : Wired network

Turn on welding equipment and wait 2 minutes
Follow instructions below

Updated on: 25/11/2023

Was this article helpful?

Thank you!