Articles on: Onboarding

How to connect ESAB SAW multi torch system to WeldCloud using WeldCloud Link app

Prerequirements


Before starting, please ensure following prerequisites are met


  1. Any Android (7.0 and up) based device with Bluetooth capabilities and Internet access
  2. Active InduSuite account with WeldCloud Productivity and/or Fleet license
  3. At least one Site created in your organizational structure in WeldCloud (details can be found here)
  4. WeldCloud Link app installed from Google Play store
  5. Wi-Fi dongle, in case you want to connect your ESAB SAW multi torch system through Wi-Fi network (Please look at supported USB to W-Fi dongles here)


WeldCloud connection steps - Connection method : WiFi network


  1. Install WiFi and Bluetooth dongles to add wireless and Bluetooth capabilites to Compulab gateway as explained here
  2. Turn on welding equipment and wait 2 minutes
  3. Follow instructions below



WeldCloud connection steps - Connection method : Wired network


  1. Turn on welding equipment and wait 2 minutes
  2. Follow instructions below


Updated on: 22/04/2024

Was this article helpful?

Share your feedback

Cancel

Thank you!