• Add a Parts/ISO Drawing in WeldCloud Assembly

  Adding a Parts/ISO Drawing in WeldCloud Assembly is quite easy. In this example, you can see how to add 1 drawing: You can also add multiple drawings at once, using the Bulk Upload option: If you want to know how to add a General Drawing for an Assembly, click here (https://supPopular

• Add a General/Reference Drawing in WeldCloud Assembly

  Adding a General/Reference Drawing in WeldCloud Assembly is quite easy. In this example, you can see how to add 1 drawing: You can also add multiple drawings at once, using the Bulk Upload option: If you want to know how to add drawings for indivSome readers

• How to View/Print QR Codes of a specific Part of an Assembly

  Welders, using the WeldCloud Link App, can now identify which Part, WPS, Weld, Base & Filler Materials and Passes they are going to weld. Not yet available for Apple devices. If you want to View or Print the QR Codes of an Assembly's Part, follow the below instructions: frame (https://scribehow.com/embed/HowtoViewPrintQRCodesofaspecificPartFew readers

• How to Add a New Assembly with Parts and Welds

  The first part of WeldCloud Assembly, is to create an Assembly with Parts and Welds. You can see how easy it is to do that, below. See how you can add a General Drawing to WeldCloud Assembly, here. See how you can add an ISO/Parts Drawing to WeldCloudFew readers

• Send Weld Details to a Connected Equipment for Welding Parameter Traceability

  With WeldCloud Assembly, you can now send Weld Details to a connected equipment, so you can have full welding parameter traceability. You will be able to check if the parameters of each weld session are inside the range of the WPS.Few readers

• How to Duplicate Welds in WeldCloud Assembly

  If you have similar Welds in one of your Assemblies, you can easily duplicate them following the below instructions: All the newly created Welds are now available at the end of the Welds list of your Part or Assembly.Few readers

• How to create a New Site in WeldCloud Assembly?

  If you want to create a new Site in WeldCloud Assembly, you can do so in the Settings App. Follow the below instructions on how to do it.Few readers

• How to manage Personnel in WeldCloud Assembly?

  Managing Personnel in WeldCloud Assembly is done in the Settings App. While in WeldCloud Assembly, select the following link to manage your Personnel: You can find more information here. You can create and manage the following type of Personnel:Few readers

• Generating Non-Destructive Test Reports in Indusuite

  There's a new way to generate your NDT Reports in InduSuite. Head over to WeldCloud Assembly, and follow the tutorial below:Few readers

• How to Create Weld Instructions

  Now, you can create Weld Instructions in WeldCloud Assembly. Easily add your Groove Designs and Weld Layer Configuration drawings to your Welds in Assembly, by following these simple instructions:Few readers

• Compare Welding Parameters to the WPS's Range

  After assigning a welding machine to a specific weld, all the weld sessions from that machine will be tagged to this weld. You can then compare the welding parameters to the range of the WPS being used in this weld. Note: This is available for single and multi-torch weld sessions.Few readers

• Record Preweld Temperatures in WeldCloud Assembly

  You can now record Preweld Temperatures in WeldCloud Assembly using the "Send to Machine" option inside a Weld. Follow these easy steps to learn how to do it: You can also record Preweld Temperatures using WeldCloud Fleet. See how you can do it, here.Few readers

• How to Edit Weld Tags

  If you missed tagging one or several of your welds, you can now easily tag them in WeldCloud Assembly. Follow these simple instructions and learn how you can do it:Few readers

• How To Access Non-Compliance Events

  Every time you have a Non-Compliance in one of your weld sessions, you can easily access it by going to the Events page and selecting the one you want to check.Few readers